HP 1650B

ARMBnc
ARMBnc
command/query
The ARMBnc command selects the source that will generate the arm out
signal that will appear on the rear panel BNC labelled External Trigger
out.
The ARMBnc query returns the source currently selected.
Command Syntax:
:SYSTem:ARMBnc (MACHine{ 112) ) NONE}
Example: OUTPUT XXX;“:SYSTEM:ARMBNC MACHINEI”
Query Syntax:
:SYSTem:ARMBnc?
Returned Format: [:SYSTem:ARMBnc] {MACHine{ 112) 1 NONE} c NL>
Example: 10 DIM Mode$[lOO]
20 OUTPUT XXX;“:ARMBNC?”
30 ENTER XXX;Mode$
40 PRINT Mode$
50 END
System Commands
6-4
HP 1650B/HP 16518
Programming Reference