HP 16z-ad000 - Display; Low blue light mode (select products only); IMAX Enhanced Mode (select products only); Wake-on-voice (select products only)

Table 2-2 Left-side components and their descriptions (continued)
Component Description
(5) USB Type-C power connector and 10 Gbps
port with HP Sleep and Charge and
DisplayPort output
Connects an AC adapter that has a USB Type-C connector,
supplying power to the computer and, if needed, charging the
computer battery.
– and –
Connects a USB device, provides high-speed data transfer,
and charges small devices (such as a smartphone), even
when the computer is off.
NOTE: Use a standard USB Type-C charging cable or cable
adapter (purchased separately) when charging a small
external device.
– and –
Connects a display device that has a USB Type-C connector,
providing DisplayPort output.
Display
The computer display can include essential components such as speakers, antennas, cameras, and
microphones.
Low blue light mode (select products only)
Your computer display is shipped from the factory in low blue light mode for improved eye comfort and
safety. Also, blue light mode automatically adjusts blue light emissions when you are using the computer
at night or for reading.
WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide . It describes proper
workstation setup and proper posture, health, and work habits for computer users. The Safety &
Comfort Guide also provides important electrical and mechanical safety information. The Safety &
Comfort Guide is available on the web at http://www.hp.com/ergo.
IMAX Enhanced Mode (select products only)
Select computer models are configured with IMAX Enhanced Mode, a solution built into the hardware
and software to enhance the IMAX audio and video experience.
To access the latest setup documentation, go to http://www.hp.com/support, type IMAX in the Search
our knowledge library search box, and then select HP Consumer Notebook PCs - Enabling the IMAX
features.
Wake-on-voice (select products only)
Use the wake-on-voice feature to bring the computer out of the Sleep state quickly.
To access the wake-on-voice settings, follow these steps:
1. Select the Search icon in the taskbar, type XiaoWei in the search box, and then select XiaoWei.
2. When the tool opens, scan the QR code with your mobile device, which takes you to the settings
page, where you can select your wake-on-voice features.
Display
7