5. Connect one end of the AC power cord to the AC adapter (1) and the other end to a grounded AC outlet
(2), and then connect the AC adapter to the power connector on the monitor (3).
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the AC power cord grounding plug. The grounding plug is an important safety feature.
Plug the AC power cord into a grounded (earthed) AC outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the AC power cord from the AC outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging the AC power
cord from the AC outlet, grasp the cord by the plug.
Connecting USB devices
The rear of the monitor provides one USB Type-B upstream port and two USB Type-A downstream ports.
NOTE: You must connect the USB Type-B upstream cable from the source device to the monitor to enable
the USB Type-A downstream ports on the monitor.
Setting up the monitor 7
To Next Page
Loading...
