Using the Sleep Timer
The Sleep Timer menu is used to program the monitor to enter and exit the reduced power/sleep state at
predetermined user-selectable times. For example, you can set the monitor to automatically enter sleep
mode at 5 p.m. and then automatically wake from sleep mode at 8 a.m. When the monitor is in sleep mode,
the power light blinks amber.
To use the Sleep Timer:
1. Press the center of the OSD joystick to open the OSD.
2. Select Power.
3. Select Sleep Timer, and then select On.
4. Set the times you want the monitor to enter into sleep mode and wake from sleep mode.
NOTE: The Sleep Timer is disabled if the Power-O Timer is active.
Using the Sleep Timer 15
To Next Page
Loading...
