Using RGB Gain Control
The RGB Gain Control can be used to manually adjust the color temperature of any color preset, making all
color presets adjustable user modes. Adjustments are stored separately for each color preset.
To adjust the color temperature:
1. Press the center of the OSD joystick to open the OSD.
2. Select Color.
3. Select RGB Gain Control.
4. Select either Red Color ADJ SCALE GRAPHIC, Green Color ADJ SCALE GRAPHIC, or Blue Color ADJ SCALE
GRAPHIC.
NOTE: Exiting the menu will auto-save the RGB color settings.
Viewing the Frame Rate
Turning on the Frame Rate function allows you to view the current active input frames per second (FPS) in a
number that will appear in one section on the screen. There are Color and Location submenus to select FPS
text colors and screen locations.
To view the FPS on the screen:
1. Press the center of the OSD joystick to open the OSD.
2. Select Gaming.
3. Select Frame Rate, and then select On.
4. Set the color and location of the FPS displayed on the screen.
NOTE: Frame Rate and Message Timer OSD functions share the same color and location settings.
18 Chapter 2 Using the monitor
To Next Page
Loading...
