Configuring the console switch 41
4.
Enter up to four addresses of the management stations where you want the SNMP traps and Syslog
information sent.
Ports
You can view and edit the information for the following console switch ports:
• Interface adapters
• Cascade devices
• Local console port UI
Interface adapter ports
To view the port location of each interface adapter attached to the console switch:
Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
Deleting offline interface adapters
1. Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
2. Select Delete Offline.
Configuring interface adapter USB speed
NOTE: Configuring the interface adapter speed is only applicable to the HP USB with Virtual
Media Interface Adapter (AF603A) and the HP PS2 with Virtual Media Interface Adapter
(AF604A).
1. Select Unit View>Appliance>Appliance Settings>Ports>IAs. The Appliance IAs page appears.
2. Select the checkbox next to the interface adapter you want to edit.
3. Select either Set USB 1.1 Speed or Set USB 2.0 Speed.
Upgrading the interface adapter firmware
Interface adapters can be automatically updated when the console switch firmware is upgraded, if you
have Auto-Upgrade enabled. If issues occur during the normal upgrade procedure, interface adapters
might require a force upgrade.
To upgrade the interface adapter firmware:
To Next Page
Loading...
