Printing a Test File
To verify that the printer and appliance connections are correct, print a test file.
At the UNIX prompt enter:
lp -dprintername file_name
or on a BSD-like system:
lpr -Pprintername file_name
where printername is the name of the printer as added to the appliance, and file_name is the file
to be printed.
1.
To get print queue status, type the following at the prompt:
lpstat printername
or on a BSD-like system:
lpq -Pprintername
where printername is the designated printer.
Example: lpq -Pappliance1
2.
To Previous Page
Loading...
