Changing the Date and Time
Use the Date and Time Configuration page to set the date and time of the appliance.
Field Name Description
Date Enter the date in the format: mm/dd/yyyy. The complete year must be specified. Leading zeroes
may be omitted. (For example: "1/1/1999" and "12/25/2001".)
Time Enter the time in the format: hh:mm:ss. The seconds and leading zeroes may be omitted. (For
example: "5:35" and "12:00:00".)
AM/PM Use the drop-down box to select AM or PM. The 24-hour time format is not supported.
Time Zone Select the appropriate time zone from the drop-down box.
Click to keep the time and date at their previous values, or click Apply to set the date and time.
System Messages for Data and Time
To Next Page
Loading...
