Speakers
Table 6-17 Speakers description and part number
Description Spare part number
Speaker Kit L22580-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 25).
2. Remove the optical drive (see Optical drive (select products only) on page 26).
3. Remove the bottom cover (see Bottom cover on page 29).
4. Remove the battery (see Battery on page 31).
5. Remove the system board (see System board on page 51).
Remove the speakers:
1. Remove the antenna cables from the clips in the left speaker (1).
2. Remove the speaker cable from the clips built into the computer (2), and then remove the speakers from
the computer (3).
Reverse this procedure to install the speakers.
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
