a. Detach the camera module (1) from the display back cover. (The module is attached with double-
sided adhesive.)
b. Disconnect the cable (2) from the camera/microphone module.
The HD camera module is available as spare part number L22587-001.
3. If it is necessary to replace the display panel:
a. Remove the four Phillips M2.0 × 3.0 screws that secure the panel to the display enclosure.
b. Swing the top edge of the display panel forward and position the panel upside down next to the
display enclosure (1).
Component replacement procedures 57
To Next Page
Loading...
