18
Configure the
password
composition
policy
password-control composition
type-number type-number [
type-length type-length ]
Optional
By default, the setting for the
user group is used. If there is no
such setting for the user group,
the global setting is used.
Specify the service types for the local
user
service-type { ftp | lan-access |
{ ssh | telnet | terminal } * |
portal }
Required
By default, no service is
authorized to a local user.
Configure the binding attributes for
the local user
bind-attribute { call-number call-
number [ : subcall-number ] | ip
ip-address | location port slot-
number subslot-number port-
number | mac mac-address |
vlan vlan-id } *
Optional
By default, no binding attribute
is configured for a local user.
ip, location, mac, and vlan are
supported for LAN users. No
binding attribute is supported for
other types of local users.
Configure the authorization attributes
for the local user
authorization-attribute { acl acl-
number | callback-number
callback-number | idle-cut
minute | level level | user-
profile profile-name | user-role
security-audit | vlan vlan-id |
work-directory directory-name }
*
Optional
By default, no authorization
attribute is configured for a local
user.
For LAN and portal users, only
acl, idle-cut, user-profile, and
vlan are supported.
For SSH and terminal users, only
level is supported.
For FTP users, only level and
work-directory are supported.
For Telnet users, only level and
user-role is supported.
For other types of local users, no
binding attribute is supported.
Set the expiration time of the local
user
Optional
Not set by default
When some users need to
access the network temporarily,
create a guest account and
specify an expiration time for the
account.
Assign the local user to a user group
Optional
By default, a local user belongs
to the default user group system.
To Next Page
Loading...
Need help?
General