HP 5130-24G-4SFP+ EI - Connecting the Switch to an AC Power Source

19
Connecting the switch to an AC power source
Securing the AC power cord for a hot-swappable AC power supply
1. Insert the cable tie through the hole in the power supply handle.
2. Use the cable tie to secure the AC power cord to the power supply handle.
Figure 21 Securing the AC power cord for a hot-swappable AC power supply
Securing the AC power cord for a built-in power supply
1. Insert the cable tie through the cable bridge.
2. Use the cable tie to secure the AC power cord to the cable bridge.
Figure 22 Inserting the cable tie through the cable bridge