HP 5130-24G-4SFP+ EI - Power Module Status LED; RPS Status LED; Port Mode LED

49
LED mark Status Description
Off The switch is powered off.
Power module status LED
T h e H P 513 0 -24 G - S F P- 4 S F P + E I / H P 513 0 -24 G - S F P- 4 S F P + E I TA A s w i t c h p r o v i d e s t h e P W R 1 a n d PW R 2
LEDs on the front panel to indicate the operating status of the power supplies.
Table 18 Power module status LED description
LED mark Status Description
PWR1/PWR2
Steady green
A power supply is installed in the power supply slot, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in the power supply slot, but the power
supply is faulty or not powered on..
Steady red
A power supply is installed in the power supply slot, but the power
supply is faulty.
Off No power supply is installed in the power supply slot.
RPS status LED
The HP 5130-24G-PoE+-4SFP+ (370W) EI, HP 5130-24G-PoE+-4SFP+ (370W) EI TAA, HP
5130-48G-4SFP+ EI, HP 5130-48G-4SFP+ EI TAA, HP 5130-48G-PoE+-4SFP+ (370W) EI, and HP
5130-48G-PoE+-4SFP+ (370W) EI TAA switches support RPS input and provide an RPS status LED on the
front panel to indicate the RPS operating status.
Table 19 RPS status LED description
LED mark Status Description
RPS
Steady green Both the RPS DC input and the AC input are normal.
Steady yellow
The RPS DC input is normal, but the AC input is disconnected or
has failed.
Off The RPS DC input has failed, or no RPS is connected.
Port mode LED
The HP 5130-24G-PoE+-4SFP+ (370W) EI, HP 5130-24G-PoE+-4SFP+ (370W) EI TAA, HP
5130-48G-PoE+-4SFP+ (370W) EI, and HP 5130-48G-PoE+-4SFP+ (370W) EI TAA switches provide a
port mode LED. The port mode LED indicates the type of information that the network port LEDs are
showing. You can use the port LED mode switching button to change the type of displayed port
information.