50
Table 20 Port mode LED description
LED mark Status Description
Mode
Steady green The network port LEDs are showing port rates.
Flashing green The network port LEDs are showing the PoE status of the ports.
10/100/1000Base-T Ethernet port LED
The HP 5130-24G-SFP-4SFP+ EI, HP 5130-24G-SFP-4SFP+ EI TAA, HP 5130-48G-4SFP+ EI, HP
513 0 - 4 8 G - 4 S F P + E I TA A , H P 513 0 - 48 G - Po E + - 4 S F P + ( 370 W ) E I , a n d H P 513 0 - 48 G - Po E + - 4 S F P + ( 370 W )
EI TAA switches provide a double-color LED for each 10/100/1000Base -T Ethernet port to indicate their
operating status.
Figure 50 10/100/1000Base-T Ethernet port LED description for HP 5130-24G-SFP-4SFP+ EI/HP
5130-24G-SFP-4SFP+ EI TAA, HP 5130-48G-PoE+-4SFP+ (370W) EI/HP 5130-48G-PoE+-4SFP+
(370W) EI TAA, and HP 5130-48G-4SFP+ EI/HP 5130-48G-4SFP+ EI TAA
Switch model
Port mode
LED (Mode)
status
Status Description
• HP
5130-48G-4SFP+
EI
• HP
5130-48G-4SFP+
EI TAA
• HP
513 0 - 24 G - S F P - 4 S F
P+ EI
• HP
513 0 - 24 G - S F P - 4 S F
P+ EI TAA
N/A
Steady green
The port is operating at 1000 Mbps, and a link is
present on the port.
Flashing green
The port is sending or receiving data at 1000
Mbps.
Steady yellow
The port is operating at 10/100 Mbps, and a link
is present on the port.
Flashing yellow
(not 3 Hz)
The port is sending or receiving data at 10/100
Mbps.
Flashing yellow
(3 Hz)
POST has failed on the port.
Off No link is present on the port.
• HP
513 0 - 4 8 G - P o E + - 4
SFP+ (370W) EI
• HP
513 0 - 4 8 G - P o E + - 4
SFP+ (370W) EI
TAA
Steady
green (rate
mode)
Steady green
The port is operating at 1000 Mbps, and a link is
present on the port.
Flashing green
The port is sending or receiving data at 1000
Mbps.
Steady yellow
The port is operating at 10/100 Mbps, and a link
is present on the port.
Flashing yellow
(not 3 Hz)
The port is sending or receiving data at 10/100
Mbps.
Flashing yellow
(3 Hz)
POST has failed on the port.
Off No link is present on the port.
Flashing
Steady green The port is supplying PoE correctly.