HP 5130-24G-4SFP+ EI - Page 43

41
Item
HP 5130-24G-4SFP+
EI/HP 5130-24G-4SFP+ EI
TAA
HP 5130-48G-4SFP+
EI/HP 5130-48G-4SFP+ EI
TAA
HP 5130-24G-SFP-4SFP+
EI/HP
5130-24G-SFP-4SFP+ EI
TAA
10/100/10
00Base-T
Ethernet ports
24 48
8 (Each and its
corresponding SFP port form
a combo interface.)
100/1000B
ase-X SFP
ports
N/A N/A
24 (The rightmost eight SFP
ports and their
corresponding
10/100/1000Base-T
Ethernet ports form combo
interfaces.)
SFP+ ports 4 4 4
Power
module slots
N/A N/A 2, on the rear panel
Input voltage
• Rated voltage: 100 VAC
to 240 VAC @ 50 or 60
Hz
• Max voltage: 90 VAC to
264 VAC @ 47 to 63 Hz
• AC power source
{ Rated voltage: 100 VAC to 240 VAC @ 50 or 60 Hz
{ Max voltage: 90 VAC to 264 VAC @ 47 to 63 Hz
• DC power source: –48 V DC power source in the
equipment room or RPS (recommended HP RPS models:
A-RPS800 or A-RPS1600)
{ Rated voltage: –48 VDC to –60 VDC
{ Max voltage: –36 VDC to –72VDC
Minimum
power
consumption
19 W
• AC: 38 W
• DC: 38 W
• AC: 30 W
• DC: 38 W
Maximum
power
consumption
26 W
• AC: 45 W
• DC: 50 W
• AC: 60 W
• DC: 68 W
Chassis
leakage
current
compliance
• UL60950-1
• EN60950-1
• IEC60950-1
• GB4943.1
Melting
current of
power supply
fuse
AC-input: 2 A/250 V
• AC-input: 10 A/250 V
• DC-input: 5 A/250 V
• AC-input: 5 A/250 V
• DC-input: 8 A/250 V
Operating
temperature
0°C to 45°C (32°F to 113°F)
Operating
humidity
5% to 95%, noncondensing
Fire
resistance
compliance
• UL60950-1
• EN60950-1
• IEC60950-1
• GB4943.1