HP 54600A - Automatic Voltage Measurement

Figure 11
Figure 12
Operating Your Oscilloscope
To 11ake voltage •easu•eaaeltsautoaaatleaiiJ
To make voltage measurements automatically
You can measure the following voltage parameters automatically with
the oscilloscope: peak-to-peak, average, rms, maximum, minimum, top,
and base. The following exercise guides you through the Voltage keys
by making an rms voltage measurement. Figures 11 and 12 show pulses
with some of the voltage measurement points.
VTOP
VI:IASE.
L
... 00021
Pulse wllere tile top aad botto11 are well-deflaed
VBASE=VMIN-
Pulse wllere tbe top a ad botto11 are lot well-deflaed
37