HP 54600A - Saving and Recalling Traces

Operating Your Oscilloscope
To save or recall traces
To save or recall traces
The oscilloscope has two pixel memories for storing waveforms. The
following exercise guides you through how to store and recall wavrforms
from
pixel memories.
1 Connect a signal to the oscilloscope and obtain a stable display.
2 Press I Trace j.
A softkey menu appears with five softkey selections. Four of the
softkeys are trace memory functions.
Trace Selects memory 1 or memory 2.
Trace Mem Turns on or off the selected memory.
Save to Saves the waveform to the selected memory. The front-panel
setup is saved to a separate memory location.
Clear Erases the selected memory.
Recall setup Recalls the front-panel setup that was saved with the
waveform.
54
\...._/
\_,)
\._/
. ......,
'-"
\,..,/
v
...._,;
..._,
\_,I
\,..,/
\,..,/
..._,
-
\_,I
...._,.
\,..,/
'-"
\,..;
\_,I
...._,;
\,..;
\_,I
\,..,/
\_,I
........,
-
\,..,/
v