HP 6125G Release Note

22
|<1> 9600(Default)* |
|<2> 19200 |
|<3> 38400 |
|<4> 57600 |
|<5> 115200 |
|<0> Exit |
============================================================================
Enter your choice(0-5):
2. Enter the number that represents the baudrate you want to choose. For example, enter 5 to set the
baudrate to 115200 bps.
NOTE:
The baudrate change is a one-time operation. The baudrate will restore to the default (9600 bps) at
reboot. To set up a console session with the device after a reboot, you must change the baudrate setting on
the configuration terminal back to 9600 bps.
Updating the extended BootWare segment
If the extended BootWare segment has been corrupted, enter 2 in the BASIC-BOOTWARE menu to
update it.
Enter your choice(0-5): 2
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Updating the entire BootWare
To update the entire BootWare, enter 3 in the BASIC-BOOTWARE menu.
Enter your choice(0-5): 3
Please Start To Transfer File, Press <Ctrl+C> To Exit.
Waiting ...CCCCC
Running the primary extended BootWare segment
To bootstrap the system software image with the primary extended BootWare segment, enter 4 in the
BASIC-BOOTWARE menu.
Enter your choice(0-5): 4
Booting Normal Extend BootWare
The Extend BootWare is self-decompressing................................
Done!
****************************************************************************
* *
* BootWare, Version 1.07 *
* *
****************************************************************************
Compiled Date : Jan 6 2013
CPU Type : P2020
CPU L1 Cache : 32KB
CPU L2 Cache : 512KB
CPU Clock Speed : 1000MHz

HP 6125G Specifications

General

Brand	HP
Model	6125G
Category	Switch
Language	English