HP 6125G - Disabling Password Recovery Capability; Table 16 DEVICE CONTROL Menu Options

36
|<3> Set The Default Boot Device |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3):
Table 16 DEVICE CONTROL menu options
Option
Task
<1> Display All Available Nonvolatile Storage Device(s)
Display all available storage media.
<2> Set The Operating Device
Set the current storage medium. All file
operations performed using BootWare menus
are performed on the current storage medium.
<3> Set The Default Boot Device
Set the default storage medium from which the
system will start up.
<0> Exit To Main Menu
Return to the EXTEND-BOOTWARE menu.
Using the EXTEND-ASSISTANT menu
In the EXTEND-BOOTWARE menu, press Ctrl+Z to access the EXTEND-ASSISTANT menu.
==========================<EXTEND-ASSISTANT MENU>===========================
|<1> Display Memory |
|<2> Search Memory |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-2):
Formatting the file system
CAUTION:
Formatting the file system of a storage medium can cause the loss of all files.
To format the file system of the current storage medium:
1. Press Ctrl + F while you are in the EXTEND-BOOTWARE menu.
2. Enter Y when the prompt for confirmation appears.
Warning:All files on flash will be lost! Are you sure to format? [Y/N]
Disabling password recovery capability
Password recovery capability controls console user access to the device configuration and SDRAM from
BootWare menus.
If password recovery capability is enabled, a console user can access the device configuration and clear
the console login password for an access without authentication.
If password recovery capability is disabled, a console user cannot access the device configuration or
clear the console login password from BootWare menus.