EasyManua.ls Logo

HP 6125G - Table 10 EXTEND-BOOTWARE Menu Options

HP 6125G
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
1. Reboot the device or run the primary or backup extended BootWare segment from the
BASIC-BOOTWARE menu.
2. Press Ctrl + B within five seconds after the "Press Ctrl+B to enter extended boot menu..." prompt
message appears. If you fail to do this, the system starts decompressing the system software.
BootWare password: Not required. Please press Enter to continue.
3. Press Enter at the prompt for password.
The EXTEND-BOOTWARE menu appears.
Password recovery capability is enabled.
Note: The current operating device is flash
Enter < Storage Device Operation > to select device.
===========================<EXTEND-BOOTWARE MENU>===========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9):
Availability of some options in this menu depends on the password recovery capability state
(displayed on top of the EXTEND-BOOTWARE menu). For more information about the feature, see
"Disabling password recovery capability."
Table 10 EXTEND-BOOTWARE menu options
Option
Tasks
Reference
<1> Boot System
Run the system software without
rebooting the device.
Choose this option after completing
operations in the
EXTEND-BOOTWARE menu.
N/A

Table of Contents

Other manuals for HP 6125G

Related product manuals