HP 6125G - Performing a RAM Test; Using the EXTEND-BOOTWARE Menu; Table 9 BASIC-ASSISTANT Menu

23
Memory Type : DDR3 SDRAM
Memory Size : 1024MB
Memory Speed : 800MHz
BootWare Size : 895KB
Flash Size : 256MB
CPLD Version : 003
PCB Version : Ver.B
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Running the backup extended BootWare segment
To bootstrap the system software image with the backup extended BootWare segment, enter 5 in the
BASIC-BOOTWARE menu. For information about backing up the extended BootWare segment, see
"Managing the BootWare image."
Enter your choice(0-5): 5
Booting Backup Extend BootWare
The Extend BootWare is self-decompressing................
Done!
Accessing the BASIC-ASSISTANT menu
To access the BASIC-ASSISTANT BOOTWARE menu, press Ctrl + U while you are in the
BASIC-BOOTWARE menu.
===========================<BASIC-ASSISTANT MENU>===========================
|<1> RAM Test |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-1):
Table 9 BASIC-ASSISTANT menu
Option
Task
<1> RAM Test
Perform RAM self-test.
<0> Exit to Main Menu
Return to the BASIC-BOOTWARE menu.
Performing a RAM test
To perform a RAM test, press Ctrl + T within four seconds after the prompt message " Press Ctrl+T to start
memory test" appears (see "Accessing the BASIC-ASSISTANT menu").
Using the EXTEND-BOOTWARE menu
To access the EXTEND-BOOTWARE menu: