HP 8153A - Page 100

Press to look at or edit the parameters. After pressing (EdiFl , you can
select parameters using and (p^. While you are editing a parameter, the
mode-indicator shows MENU SYS EDIT.
MM/DD/YY
When you select this parameter, the left side character field shows the message
MM/DD/YY. The right side character field shows the setting for the date, in the
format month/day/year.
You edit the date using the Modify keys. The date is set to the displayed value
when you edit it.
HH:MM:SS
When you select this parameter, the left side character field shows the message
The right side character field shows the setting for the time, in the
format hours:minutes:seconds.
You edit the time using the Modify keys. The time is set to the displayed value
when you edit it.
Example The time is 11:25:38
You edit the time so that it shows 11:25:58.
The time is set to 11:25:58 as soon as you finish the edit.
Although the display does not change the time itself changes.
To check this you can change to date and then change to time
again (by pressing (Next) twice).
4-8 Local Contol • System Mode