HP 8153A - Page 134

Related Commands None.
Example OUTPUT 722;"STAT:0PER:SETT:EVEN?"
ENTER 722 ;A$
status: <node> :NTRansition
Syntax STATus:<node>:NTRansition <vaiue>
0 < value < 32767
Description This command sets the negative transition Alter for the
node. You send the value as an integer (NRf). A 1 in any
bit of this register enables the negative transition. That is,
if a bit is set to 1 and the corresponding bit at the input
changes from 1 to 0, the output goes to 1.
Related Commands STAT: <node> : NTR?
Example OUTPUT 722; "STAT: qUES :P0W; OVERR: NTR 3"
status: <node> :NTRansition?
Syntax STATus : <node>: NTRansition?
Response <value>
0 < value < 32767
Description This query returns the value for the setting of the
negative transition filter for the node. The value is
returned as an integer (NRl).
Related Commands STAT: <node>: NTR
Example OUTPUT 722; "STAT: QUES: ISUM: IMSTl: NTR?"
ENTER 722 ;A$
STATUS :< node >: PTRansition
Syntax STATus :<node>:PTRansition <value>
0 < value < 32767
Description This command sets the positive transition filter for the
node. You send the value as an integer (NRf). A 1 in any
bit of this register enables the negative transition. That is,
7-6 Remote Operation • Status Commands