HP 8153A - Page 151

HP-IB Commands
This chapter gives a list of the HP 8153A HP-IB commands.
The commands are grouped according to the modules to which they refer. A list
of the extra commands for a module are supplied with that module. Install the
relevant pages into this chapter each time you add a module to your system.
ABORt Commands
This is one of the commands that relates to the triggering of sensor modules.
Thble 8-1. ABORt Command Summary
Command Parameter
AB0Rt[l|2]
Specifying the Channel
You specify the channel by attaching a numeric suffix to the mnemonic. You
access channel A by using ABORtl, you access channel B by using AB0Rt2. If do
not add a suffix to the mnemonic, channel A is assumed.
ABORt
Syntax AB0Rt[l|2]
Description This command aborts the measurement being made.
Related Commands IKITtIMM, IKIT:C0NT, INITiCONT?
Example OUTPUT 722; "ABOR"
Remote Operation ■ Commands 8-1