HP 8153A - Page 157

INITiate Commands
This is one of the commands that relates to the triggering of sensor modules.
Tkble 8-4. INITiate Command Summary
Command Parameter
INITiats[l|2]
: COMTinuous <boolean>
:COMTlnuous?
[:IMMediate]
Specifying the Channel
You specify the channel by attaching a numeric suffix to the mnemonic. You
access channel A by using IMITiatei, you access channel B by using or
IMITiate2. If do not add a suffix to the mnemonic, channel A is assumed.
INITiate:CONTiimous
Syntax INITiatG[l|2|:CONTinuous” <wsp><boolean>
Description This command initiates the trigger system for continuous
trigger operation, that is, measurements are made
continuously.
Related Commands ABOR, IHITiIMM, INIT:CQMT?
Example OUTPUT 722; "IMITl :C0MT OFF"
INITiate :CONTinuous?
Syntax IMITiate[i|23;CONTinuous?'’
Response <boolean>
Description This command returns whether the triggering system is
operating continuously or not. The status is returned as
either 0 or i. 0 means that continuous triggering is not
selected. 1 means that continuous triggering is selected.
Related Commands ABOR, INITiIMM, INIT:C0WT
Remote Operation - Commands 8-7