HP 8153A - Page 158

Example OUTPUT 722;"INIT:C0KT?"
ENTER 722 ;A$
INITiate[:IMMediate]
Syntax INITiate[l|2][:IMMediate]”
Description This command initiates the trigger system and completes
one full trigger cycle, that is, one measurement is made.
Related Commands ABOR, INITiCONT, IMITrCOMT
Example OUTPUT 722; "INIT2"
READ Commands
These commands relate to measuring signals with the sensor modules.
Ikble 8-5. READ Command Summary
Command I^rameter
READ[i|2]
[:SCALar]
:PQWER
[:DC]?
Specifying the Channel
You specify the channel by attaching a numeric suffix to the or READ mnemonic.
You access channel A by using READ!, you access channel B by using READ2. If
you do not add a suffix to the mnemonic, channel A is assumed.
READ[ :SCALar] :POWer[ :DC]
Syntax READ[l|2][:SCALar]:POWer[:DC]?
Response <value>
Description This command gets a reading from the module. This
command provides it’s own triggering and does not need
a triggering command. The value read back is a floating
8-8 Remote Operation • Commands