HP 8153A - Page 184

Example OUTPUT 722; "PROG :SEL:MUMB? ASAMPLES"
ENTER 722 ;A$
PROGram[:SELected]:STAIte
Syntax PROGrain[i|2]:[:SELected]:STA'Ite”
CONTinue|PAUS6lRUN|STOP|0|l|2|3
Description This command sets the state for an application. RUN (or 2)
runs the application, this is equivalent to PROG :SEL: EXEC.
PAUSe (orl) pauses the application. STOP (or 3) stops the
application. CONTinue (or 0) restarts the application after
aPAUSe.
Related Commands PROG:SEL;STAT 0 ?, PROG:SEL;NAME
Example OUTPUT 722; *'PROG:SEL:STATe RUM"
PROGrani[:SELected]:STATe?
Syntax PR0Gram[i|2]:[:SELected]:STATe?”
Response 0|1|2|3
Description This command returns state of the selected application. 0
means that the application is continuing (after a pause).
1 means that the application is paused. 2 means that an
application is running. 3 means that an application is
stoppe.
Related Commands PROG: SEL: STAT, PROG: SEL: NAME
Example OUTPUT 722; " PROG: SEL: STAT? "
ENTER 722 ;A$
94 Remote Operation ■ Application Commands