4-77
Remote Operation
HCOPy Subsystem Commands
HCOPy Subsystem Commands
HCOPy:DATA?
Returns the currently defined printer output as an indefinite length block.
After removing the #0 prefix and newline suffix, this block can be saved by the
controller and sent directly to a suitable printer.
HCOPy:DESTination “SYSTem:COMMunicate:INTernal”|”SYStem:COMMunicate:CENtronics”
HCOPy:DESTination?
Selects the I/O port for hard copy output. This affects subsequent presses of
the
Print
key and the HCOPy[:IMMediate] command.
HCOPy[:IMMediate]
The entire screen is output to the port defined by the HCOPy:DESTination
command. This is equivalent to pressing the
Print
key.
book.book Page 77 Monday, January 31, 2000 10:34 AM
To Next Page
Loading...
