4-90
Remote Operation
SOURce[n] Subsystem Commands
SOURce[n] Subsystem Commands
SOURce[n]:PULSe:DCYCle <numeric_value>
SOURce[n]:PULSe:DCYCle?
Sets the duty cycle of the sync output. This is equivalent to the
TRIGger[:SEQuence]:OUTPut:PULSe:DCYCle command.
SOURce[n]:PULSe:WIDTh <numeric_value>[S|MS|US|NS]
SOURce[n]:PULSe:WIDTh?
Sets the pulse width of the sync output. This is equivalent to the
TRIGger[:SEQuence]:OUTPut:PULSe:WIDTh command.
book.book Page 90 Monday, January 31, 2000 10:34 AM
To Next Page
Loading...
