HP 86140A Series User Manual

4-91
Remote Operation
STATus Subsystem Commands
STATus Subsystem Commands
STATus:OPERation:CONDition?
Queries the contents of the operation condition register.
STATus:OPERation:ENABle <int_value>
STATus:OPERation:ENABle?
Sets or queries the contents of the operation enable register.
STATus:OPERation[:EVENt]?
Queries the contents of the operation event register. This query reads the con-
tents of the register and then clears it.
STATus:OPERation:NTRansition <int_value>
STATus:OPERation:NTRansition?
Sets or queries the contents of the operation negative transition register.
STATus:OPERation:PTRansition <int_value>
STATus:OPERation:PTRansition?
Sets or queries the contents of the operation positive transition register.
STATus:PRESet
Clears the event registers and sets all bits in the enable registers.
STATus:QUEStionable:CONDition?
Queries the contents of the questionable condition register.
book.book Page 91 Monday, January 31, 2000 10:34 AM

HP 86140A Series Specifications

General

Brand	HP
Model	86140A Series
Category	Measuring Instruments
Language	English