HP 86140A Series

3-40
Using the Optical Spectrum Analyzer
The System Menus
The System Menus
The System softkeys are accessed using the front-panel
System
key or the
Options menu System selection on the menu bar. If you wish to change system
settings, the front-panel System key provides access to the following functions
and setup panels:
Function See....
Help....
Show Critical Errors.... “To display notices, bandwidth errors, critical errors and
warnings” on page 3-42
Show BW Errors.... “To display notices, bandwidth errors, critical errors and
warnings” on page 3-42
Show Warnings.... “To display notices, bandwidth errors, critical errors and
warnings” on page 3-42
Show Notices.... “To display notices, bandwidth errors, critical errors and
warnings” on page 3-42
Revision.... “To display the firmware revision” on page 3-42
Set Title.... “To add a title to the display” on page 3-42
Display Setup.... “To change the display setup” on page 3-43
Printer Setup.... “To set up a printer” on page 3-44
Calibration....
Power Cal Setup.... “To perform a power calibration” on page 3-44
Wavelength Cal Setup.... “To perform a wavelength calibration” on page 3-45
Move Active Area “To move the active function area” on page 3-47
book.book Page 40 Monday, January 31, 2000 10:34 AM