4-101
Remote Operation
UNIT Subsystem Commands
UNIT Subsystem Commands
UNIT:POWer DBM|W|AUTO
UNIT:POWer?
Specifies the amplitude units for the input, output, and display of the active
window and sets the UNIT:RATio units to the corresponding setting.
UNIT:RATio DB|LINear|AUTO
UNIT:RATio?
Specifies units for the input and output of values that represent power ratios.
These commands are:
CALCulate:MARKer[1|2|3|4]:FUNCtion:BWIDth|BANDwidth:NDB
DISPlay:WINDow:TRACe:Y:SCALe:AUTO:PDIVision
DISPlay:WINDow:TRACe:Y:SCALe:PDIVision
TRACe:DATA:Y?
This command also sets UNIT:POWer to the corresponding setting.
book.book Page 101 Monday, January 31, 2000 10:34 AM
To Next Page
Loading...
