HP 8712ES - User-Defined BEGIN Key Menu

3-6 Automating Measurements
Operator Interaction
User-Defined BEGIN Key Menu
User-Defined BEGIN Key Menu
The feature adds the following capabilities:
• Create softkeys to allow one-key-press operation of functions that
usually take several key presses.
• Reassign softkeys to implement your most-used functions/features.
• Create softkeys to implement new features created with IBASIC—for
example, a gain-compression measurement.
• Create softkeys to implement application support.
This feature is designed to provide the fastest possible sweep speeds
while taking advantage of the flexibility provided by IBASIC. This is the
simplest way for recalling instrument states or configuring most-used
softkey functions under a single softkey menu. The eighth softkey in the
menu provides access to the menus below. Toggle the eighth
softkey to enable/disable or . You cannot
redefine the eighth softkey.
Once you have selected a menu, the same menu will be displayed for
subsequent key presses of the hardkey.
Amplifier
Filter
Broadband Passive
Mixer
Cable (Option 100 only)
User BEGIN on OFF −−−−>
User label 1
User label 2
User label 3
User label 4
User label 5
User label 6
User label 7
User BEGIN ON off
User BEGIN
BEGIN
BEGIN
User BEGIN
BEGIN
User BEGIN
BEGIN