HP 8712ES - Customized Measurement-Channel Annotation; To Turn on User-Defined Measurement-Channel Annotation; To Specify the String to be Displayed; To Restore Default Measurement-Channel Annotation

7-8 Automating Measurements
Displaying Measurement Results
Customized Measurement-Channel Annotation
Customized Measurement-Channel
Annotation
The analyzer displays measurement-channel annotation above the
graticule. This annotation shows the measurement type, format,
scale/division, and reference level.
You may replace this annotation with your own text (see Figure 7-1) or
eliminate the measurement-channel annotation completely.
To turn on user-defined measurement-channel
annotation
To turn on user-defined measurement-channel annotation, use the
command:
DISP:ANN:CHAN[1|2]:USER[:STATe] ON
where [1|2]indicates the measurement-channel number: either 1 or 2.
To specify the string to be displayed
To specify the string to be displayed use the command:
DISP:ANN:CHAN[1|2]:USER:LAB[:DATA]
For example:
DISP:ANN:CHAN1:USER:LABel '1: SuperNotch filter, test #3'
To restore default measurement-channel
annotation
To restore the default measurement-channel annotation, use:
DISP:ANN:CHAN[1|2]:USER OFF