HP 8753E - Page 12

‘able l-l. Preset Conditions (3 of 5)
PRESET CONDITIONS
Time Domain (cont.)
Demodulation
Window
Use Memory
System Parameters
HP-IB Addresses
HP-IH Mode
Focus
Clock Time Stamp
Preset: Factory/User
Copy Configuration
Parallel Port
Plotter Type
Plotter Port
Plotter Baud Rate
Plotter Handshake
HP-IB Address
Printer Type
Printer Port
Printer Baud Rate
Printer Handshake
Printer HP-IB Address
PRESET
VALUE
Off
Normal
Off
Last Active
State
Last Active
Stab.?
Last Active
State
On
Last Selected
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
Last Active
State
PRESET CONDITIONS
Disk Save
Configuration
(Define Store)
Data Array
Raw Data Array
Formatted Data Array
Graphics
Data Only
Directory Size
Save Using
Select Disk
Disk Format
Sequencing*
Loop Counter
TfLOUT
Service Modes
HP-IB Diagnostic
Source Phase Lock
Sampler Correction
Spur Avoidance
Aux Input Resolution
Analog Bus Node
Plot
Plot Data
Plot Memory
Plot Graticule
Plot Text
Plot Marker
PRESET
VALUE
Off
Off
Off
Off
Off
Default’
Binary
Internal Memory
LIF
0
High
Off
Loop On
On
On
Low
11 (Aux Input)
On
On
On
On
On
1 The directory size is calculated as 0.013% of the floppy disk size (which is
~256) or 0.005% of the hard disk size.
2 Pressing preset turns off sequencing modify (edit) mode and stops any
running sequence.
HP-IB I’rogramrm
‘ng and Command Reference Guide
l-5