Alphabetical
Mnemonic
Listing
Symbol conventions:
[I
Optional data.
D
Numerical data.
I
An integer appendage that is part of the command.
For example,
CLEA<I>,
where I = 1 to 5, indicates
that the actual commands are CLEAl ,
CLEAS,
CLEAS,
CLEA4,
and
CLEA5.
$4
A character string operand which must be enclosed by
double quotes.
<>
I
A necessary appendage.
An either/or choice in appendages.
Note
All instrument functions can be queried to find
the current ON/OFF state or value. lb perform a
query, append the question mark character
(‘?)
to the
command. For example:
F’OldE?
j
.
Mnemonic Description
AI3
Measures and displays A/B on the active
channel.
ADAPl[D]
ADDRCONT[D]
ADDRDISC[D]
ADDRLSRC[D]
ADDRPERI[D]
ADDRPLOT[D]
ADDRPOWM[D]
ADDRPRIN[D]
ADPTCOAX
Sets adapter electrical
delay.&nge:
f10
s.
Controller HP-IB address: the address
where control is returned after a pass
control. Range: 0 to 30.
Disk
HPIB
address. Range: 0 to 30.
LO Source HPIB address. Range: 0 to 30.
Peripheral HI-IB address (for sequencing).
See also TITTPERI. Range: 0 to 30.
Plotter HP-IB address. Range: 0 to 30.
Power meter HP-IB address.
Range:
0 to
30.
Printer HP-IB address. Range: 0 to 30.
Sets adapter to
COAXial.
HP-IB Programming and Command Reference Guide
l-103
To Next Page
Loading...
