Identification
The analyzer’s response to I INi’?; is HEWLETT
pHC:C:ARDT
:Wl#~lE
Y
Q?
::.::
.
>G::
where
S7NNE
is the model
number of the instrument and XXX is the firmware revision of the
instrument.
The analyzer also has the capability to output its serial number with the
command
l’IILlTF’SEFF:t4
3
, and to output its installed options with the
command IY~TF’lX’TS; .
Output Syntax
The following three types of data are transmitted by the analyzer in
ASCII format:
w
response to query
=
certain output commands
n ASCII floating-point
(FORM4)
array transfers
1-28 HP-IB
Programnu
‘ng and Command Reference Guide
To Next Page
Loading...
