HP 8753E - Data-Processing Chain; Data Arrays

Data-Processing Chain
This section describes the manner in which the analyzer processes
measurement data. It includes information on data arrays, common
output commands, data levels, the learn string, and the calibration kit
string.
Data Arrays
Figure l-4 shows the different kinds of data available within the
instrument:
H pre-raw measured data
n raw measured data
n error-corrected data
n formatted data
H trace memory
H calibration coefficients
Trace memory can be directly output to a controller with O~_iTF’PlEtK~ j ,
but it cannot be directly transmitted back.
HP-IB Programming and Command Reference Guide
l-37