TSTIOFWD[D]
Defines 3 bits, DO through
D2,
on the test
set connector I/O for the channel 1 and
channel 2 forward settings. These bits can
be set to values of 0 through 7. Be careful
that you do not also set a value to
ATTPl
and
A’ITPB
as there is interaction between
these commands and they will change
the values you have set for DO through
D2
and will couple the channels together.
Values for ATTPl and
ATTPS
translate to
the following values for DO through
D2:
HP-IB
Progr
amming
and Command Reference Guide
1-159
To Next Page
Loading...
