HP 8924C - Page 129

129
S:\HP8924C\USRGUIDE\BOOK\chapters\hpibstat.fb
Chapter 4, Status Reporting
Status Reporting
Table 6 Call Processing Status Register Group, Condition Register Bit Assignments
Bit
Number
Is Condition
Register
Implemented?
Condition Comment
15 Not Used (Always 0) Defined by SCPI Version 1994.0
14 Unused in Test Set
13 Unused in Test Set
12 Unused in Test Set
11 Unused in Test Set
10 Unused in Test Set
9 Unused in Test Set
8 Unused in Test Set
7 Unused in Test Set
6 Yes Mobile station ringing. Bit state goes true (1) after a base station originated
call is attempted and the call processing state has pro-
gressed past Access. Answering the call from the
mobile station causes the bit state to go false (0).
5 Yes Call Processing subsystem
in the Connect state
Bit state mirrors the condition of the Connect
pseudo-LED on the CRT display (1=ON, 0=OFF)
4 Yes Call Processing subsystem
is in the Access state
Bit state mirrors the condition of the Access
pseudo-LED on the CRT display (1=ON, 0=OFF)
3 Yes Call Processing subsystem
is in the Page state
Bit state mirrors the condition of the Page
pseudo-LED on the CRT display (1=ON, 0=OFF)
2 Yes Authenticating Call processing is authenticating
1 Yes Call Processing subsystem
is in the Register state
bit state mirrors the condition of the Register
pseudo-LED on the CRT display (1=ON, 0=OFF)
0 Yes Call Processing subsystem
is in the Active state
bit state mirrors the condition of the Active
pseudo-LED on the CRT display (1=ON, 0=OFF)