337
S:\HP8924C\USRGUIDE\BOOK\CHAPTERS\errorms.fb
Chapter , Error Messages
Error −1315 Data from RECC contains invalid bits in word [1,2,3].
Indicates that the decoded data received on the reverse control channel contains invalid
bits in word 1 and/or word 2 and/or word 3. The raw decoded data is displayed in
hexadecimal format in the
top right-hand portion of the CALL CONTROL screen.
Raw decoded data is only displayed when the
CALL CONTROL screen Display
field is set to
Data.
Error −1316 Incomplete data received on RECC for word [1,2,3].
Indicates that the decoded data received on the reverse control channel did not contain the
proper number of bits in word 1 and/or word 2 and/or word 3. The raw decoded data is
displayed in hexadecimal format in the
top right-hand portion of the CALL CONTROL
screen. Raw decoded data is only displayed when the
CALL CONTROL screen
Display field is set to Data.
Error −1317 Incomplete data received on RVC for word [1,2,3].
Indicates that the decoded data received on the reverse voice channel did not contain the
proper number of bits in word 1 and/or word 2 and/or word 3. The raw decoded data is
displayed in hexadecimal format in the
top right-hand portion of the CALL CONTROL
screen. Raw decoded data is only displayed when the
CALL CONTROL screen
Display field is set to Data.
To Next Page
Loading...
