Link Status : Up
Event statistic :
-------------------------------------------------------------------------
Link Fault :0 Dying Gasp : 0 Critical Event : 0
Table 4 Output description
Field Description
Port Port index
Link Status Link status
Event statistic Statistics on critical Ethernet OAM link events
Link Fault Indicates whether a link fault is present: 0 for no and 1 for yes
Dying Gasp Indicate whether a fatal fault is present: 0 for no and 1 for yes
Critical Event Indicate whether a critical fault is present: 0 for no and 1 for yes
display oam link-event
Syntax
display oam link-event { local | remote } [ interface interface-type interface-number ] [ | { begin |
exclude | include } regular-expression ]
View
Any view
Default level
2: System level
Parameters
local: Displays the statistics on the local Ethernet OAM link error events.
remote: Displays the statistics on the peer Ethernet OAM link error events.
interface interface-type interface-number: Specifies a port by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display oam link-event command to display the statistics on Ethernet OAM link error events that
occurred on a local port or a peer port. Ethernet OAM link error events include errored symbol events,
errored frame events, errored frame period events, and errored frame seconds events.
If you do not specify the interface keyword, this command displays the statistics on the Ethernet OAM link
error events that occurred on all the local/peer ports.
Related commands: display oam configuration and reset oam.
7
To Next Page
Loading...
Need help?
General
