Field Description
OAMLocalErrFrameEvent
Information about remote errored frame events.
• Event Time Stamp: Time when an errored frame event occurred (in 100
milliseconds).
• Errored Frame Window: Error frame detection interval (in 100
milliseconds).
• Errored Frame Threshold: Error threshold that triggers an errored frame
event.
• Errored Frame: The number of detected error frames over the specific
detection interval.
• Error Running Total: The total number of error frames.
• Event Running Total: The total number of errored frame events that have
occurred.
oam enable
Syntax
oam enable
undo oam enable
View
Ethernet port view
Default level
2: System level
Parameters
None
Description
Use the oam enable command to enable Ethernet OAM on the Ethernet port.
Use the undo oam enable command to disable Ethernet OAM on the Ethernet port.
By default, Ethernet OAM is disabled on all Ethernet ports.
Examples
# Enable OAM on port Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] oam enable
oam errored-frame period
Syntax
oam errored-frame period period-value
undo oam errored-frame period
View
System view
10
To Next Page
Loading...
Need help?
General
