To Next Page

To Previous Page

Creation Date : Feb 23 2011,15:47:03

CPU Clock Speed : 750MHz

Memory Size : 1024MB

Flash Size : 512MB

CPLD Version : 005

PCB Version : Ver.A

Mac Address : 00E058778800

Press Ctrl-B to enter Extended Boot menu...0

In fast startup mode, you must press Ctrl + B within one second to enter the Boot menu. If you perform no

operation or press a key other than Ctrl + B within one second, the system automatically starts up and

displays the following information:

Starting to get the main application

file--flash:/a5800.bin!.............................

................................................................................

...................

The main application file is self-decompressing.................................

................................................................................

...........................Done!

The A5800 application file is self-decompressing...............................

................................................................................

............Done!

System is starting...

User interface aux1 is available.

Press ENTER to get started.

Press Enter at the prompt, and you can configure the switch when the prompt <HP> appears.

NOTE:

For more information about the configuration commands and CLI, see

HP A5820X & A5800 Switch

Series Configuration Guides

and

HP A5820X & A5800 Switch Series Command References

HP A5820X Series User Manual

Other manuals for HP A5820X Series