Remove the chassis from the rack
WARNING:
The chassis is very heavy. To reduce the risk of personal injury or damage to the equipment:
• Observe local occupational health and safety requirements and guidelines for manual material
handling.
• Remove all installed components from the chassis before installing or moving the chassis.
• Use caution and get help to lift and stabilize the chassis during installation or removal, especially
when the chassis is not fastened to the rack.
WARNING:
To reduce the risk of personal injury or damage to the equipment, you must adequately support the
chassis during installation and removal.
Procedure
1. Power down the server on page 24.
2. Disconnect all peripheral devices from the chassis.
3. Remove the power supplies (Removing and replacing a power supply on page 33).
4. Remove the system fans (Removing and replacing the system fan on page 36).
5. Remove the I/O modules (Removing and replacing the I/O module on page 31).
6. Remove all servers from the chassis (Remove the server from the chassis on page 27).
IMPORTANT:
Label the drives before removing them. The drives must be returned to their original locations.
7. Remove all drives (Removing and replacing a drive on page 34).
26 Remove the chassis from the rack
To Next Page
Loading...
Need help?
General
