HP Apollo 4510 Gen10 - Removing and Replacing the Bezel Ear; Removing and Replacing the Management Module

Removing and replacing the bezel ear
Procedure
1. Power down the server on page 24.
2. Remove the bezel ear.
1
1
2
To replace the component, reverse the removal procedure.
Removing and replacing the management module
CAUTION:
To avoid loss of data, back up all data and power down the node before removing the management
module.
Procedure
1. Power down the server on page 24.
2. Remove the management module.
30 Removing and replacing the bezel ear