HP Apollo 4510 Gen10 User Manual

8. Remove the chassis from the rack.
1
2
3
1
9. Place the chassis on a flat, sturdy surface to support the chassis.
Remove the server from the chassis
CAUTION:
Before removing the server, verify that the server backup LED is not flashing.
Procedure
1. Power down the server on page 24.
CAUTION:
To avoid damage to the server, always support the bottom of the server when removing it from
the chassis.
2. Remove the server from the chassis.
Remove the server from the chassis 27

HP Apollo 4510 Gen10 Specifications

General

Brand	HP
Model	Apollo 4510 Gen10
Category	Chassis
Language	English