NOTE: To avoid damage to the device, do not use the removal handle to carry it.
CAUTION:
To prevent improper cooling and thermal damage, do not operate the chassis unless all bays are
populated with a component or a blank.
WARNING:
To reduce the risk of injury from electric shock, do not install more than one drive carrier at a
time.
5. Prepare the low-profile LFF hot-plug drive for installation.
6. Install the low-profile LFF hot-plug drive in the drive drawer.
7. Determine the status of the drives using the drive LEDs on the storage display LEDs.
For more information, see LFF drive LED definitions on page 62.
Removal and replacement procedures 35
To Next Page
Loading...
