4–2 HP workstation c8000 — Getting Started
Troubleshooting
General Troubleshooting
The following sections provide general troubleshooting information
for your system.
System Does Not Start Properly
Make sure... How
The system power cord is
properly connected.
Verify that the power supply LED is on.
If the power supply LED is not on, verify
that the power cord is connected and that
the electrical outlet is turned on.
The LEDs are not
displaying an error
message.
Check the system status LED on the front
panel. If it is blinking orange or red, see
Troubleshooting in the HP workstation
c8000 Technical Reference Guide for
additional information.