4–6 HP workstation c8000 — Getting Started
Troubleshooting
Troubleshooting with the System LEDs
Several LEDs are on the front and rear panels of the system. The
following sections describe their functions. (For the precise locations
of these LEDs, see the figures on page 1-5 through page 1-8.)
System Status LED (front panel)
The System Status LED indicates the state of the system.
See “Diagnostic LEDs (rear panel)” on page 4-8 for additional
information on warnings and faults.
System Status LED State
Off System is off
Green System is running normally
Blinking green System is booting
Blinking orange System WARNING
Blinking red System FAULT
To Next Page
Loading...
Need help?
General
